How to Create a Transport-Themed Icon Pack in Adobe Illustrator

Post pobrano z: How to Create a Transport-Themed Icon Pack in Adobe Illustrator

Final product image
What You’ll Be Creating

In today’s tutorial we’re going to take an in-depth look at the
process of creating a transportation-themed icon pack, using some geometric
shapes and tools that you probably already work with on a daily basis.

Don’t forget, you can always expand the pack
by heading over to GraphicRiver where you’ll find a great selection of
transportation icons just waiting to be snatched.

That being said, grab
a fresh cup of that yummy mocha latte and let’s get started!

1. How to Set Up a New Project File

Since I’m sure that you already
have Illustrator up and running in the background, bring it up and let’s set up
a New Document (File > New or Control-N)
using the following settings:

  • Number
    of Artboards:
    1
  • Width:
    800
    px
  • Height:
    600
    px
  • Units:
    Pixels

And from the Advanced tab:

  • Color
    Mode:
    RGB
  • Raster
    Effects:
    Screen (72ppi)
  • Preview Mode: Default
setting up a new document

2. How to Set Up a Custom Grid

Since we’re going to be creating the icons
using a pixel-perfect workflow, we’ll want to set up a nice little Grid so that we can have full control
over our shapes.

Step 1

Go to the Edit > Preferences > Guides & Grid submenu, and adjust
the following settings:

  • Gridline
    every:
    1 px
  • Subdivisions: 1
setting up a custom grid

Quick
tip:
you can learn more about grids by reading this
in-depth piece on How Illustrator’s Grid System Works.

Step 2

Once we’ve set up our custom grid, all we
need to do in order to make sure our shapes look crisp is enable the Snap to Grid and Snap to Pixel options found under the View menu.

Now, if you’re new to
the whole “pixel-perfect workflow”, I strongly recommend you go through my How
to Create Pixel-Perfect Artwork
tutorial, which will help you widen your
technical skills in no time.

3. How to Set Up the Layers

With the new document created, it would be
a good idea to structure our project using a couple of layers, since this way
we can maintain a steady workflow by focusing on one icon at a time.

That being said, bring up the Layers panel, and create a total of
four layers, which we will rename as follows:

  • layer
    1:
    reference grids
  • layer
    2:
    train
  • layer
    3:
    bus
  • layer 4: tram
setting up the layers

4. How to Create the Reference Grids

The
reference grids (or base grids)
are a set of precisely delimited reference surfaces, which allow us to build
our icons by focusing on size and consistency.

Usually, the size of the grids determines
the size of the actual icons, and they should always be the first decision you
make once you start a new project, since you’ll always want to start from the
smallest possible size and build on that.

Now, in our case, we’re going to be
creating the icon pack using just one size, more exactly 128 x 128 px, which is a fairly large one.

Step 1

Start by locking all
but the “reference grids” layer, and then grab the Rectangle Tool (M) and create a 128 x 128 px orange (#F15A24) square, which will help define the
overall size of our icons.

creating the reference grids main shape

Step 2

Add a smaller 120 x 120 px one (#FFFFFF) which we
will position on top of the previous shape, since it will act as our active
drawing area, thus giving us an all-around 4
px
padding to work with.

creating the active drawing areas main shape

Step 3

Select and group the
two squares together using the Control-G
keyboard shortcut, center aligning them to the underlying Artboard
afterwards. Create the remaining grids using two copies (Control-C > Control-F) at a horizontal distance of 40 px from the original, locking
the current layer before moving on to the next section.

adding the remaining reference grids

5. How to Create the Train Icon

Assuming you’ve successfully managed to
create the little reference grids, move on to the next layer (that would be the
second one), and let’s kick off the project by creating our first icon.

Step 1

Start by creating the
circular background using a 120 x 120 px
circle, which we will color using #FF8D60 and then center align to the
first active drawing area.

creating and positioning the main shape for the train icons background

Step 2

Create the upper section of the train using a 60 x 60 px square, which we will color using #CBF7EC and then
center align to the larger circle, positioning it 20 px from its top edge.

creating and positioning the main shape for the trains upper body

Step 3

Adjust the shape that we’ve just created by setting the Radius of its top corners to 20 px from within the Transform panel’s Rectangle Properties.

adjusting the shape of the trains upper body

Step 4

Give the resulting shape an outline using the Stroke method, by creating a copy of it (Control-C), which we will paste in front (Control-F) and then adjust by first changing its color to #3F3330 and
then flipping its Fill with its Stroke (Shift-X). Set the resulting outline’s Weight to 4 px,
selecting and grouping the two shapes together afterwards using the Control-G keyboard shortcut.

adding the outline to the trains upper body

Step 5

Create the little roof section using a 12 x 4 px rectangle (#3F3330) which we will position on top of the
larger outline, as seen in the reference image.

adding the little roof section to the trains upper body

Step 6

Start working on the door using a 20
x 42 px
rectangle (#55AA9A) which we will adjust by setting the Radius of its top corners to 4 px from within the Transform panel’s Rectangle Properties. Give the resulting shape a 4 px thick outline (#3F3330), grouping
(Control-G) and then aligning the
two to the center of the larger body’s bottom edge.

creating and positioning the main shapes for the trains door

Step 7

Add the little window using an 8 x 10 px rounded rectangle (#3F3330)
with a 2 px Corner Radius, which we
will center align to the door, positioning it at a distance of 4 px from its top edge.

adding the window to the trains door

Step 8

Add the rectangular side insertions using two 4 x 8 px rectangles (#3F3330), which we will position at a distance
of 6 px from the door’s top edge.

adding the rectangular side insertions to the trains door

Step 9

Create the little handle using a 4 x 4 px square (#3F3330), which we will position onto the left side of the door, right
underneath the window itself. Once you’re done, select and group (Control-G) all of the current section’s
composing shapes together before moving on to the next step.

adding the handle to the trains door

Step 10

Start working on the protective string sections using three 2 x 4 px rectangles (#3F3330), which we
will vertically stack at a distance of 2
px
from one another, grouping (Control-G)
and then positioning them at a distance of 2
px
from the center of the door’s bottom edge.

adding the three rope insertion points to the trains door

Step 11

Turn on Pixel Preview
mode (Alt-Control-Y), and then use a 2 px thick Stroke with the color set to #3F3330 to draw the three rope sections.
Once you’re done, switch back to the Default
Preview
mode (Alt-Control-Y),
selecting and grouping (Control-G)
them to the smaller insertion rectangles, doing the same for the entire door
afterwards.

adding the safety ropes to the trains door

Step 12

Create the left window using an 8
x 14 px
rounded rectangle (#3F3330) with a 2 px Corner Radius, which we will position on the left side of
the door, making sure to bottom align it to the smaller center window.

adding the left window to the trains body

Step 13

Add the small rectangular insertion using a 4 x 2 px rectangle (#3F3330), which we will position above the
window, at a distance of just 6 px.

adding the small rectangular insertion to the trains left upper body

Step 14

Create the circular lights using two 4 x 4 px circles (#3F3330) vertically stacked 2 px from one another, which we will
group (Control-G) and then position
below the left window, at a distance of 4
px
.

adding the left circular lights to the trains upper body

Step 15

Start working on the left bumper by creating a 4 x 24 px rounded rectangle (#3F3330)
with a 2 px Corner Radius, which we
will align to the bottom of the larger body, positioning it at a
distance of just 2 px from its left
edge.

creating and positioning the main shape for the trains left bumper

Step 16

Create two 6 x 4 px rectangles
(#3F3330), which we will vertically stack at a distance of 6 px, grouping (Control-G)
and then positioning them on top of the bumper, at a distance of 4 px from its top edge. Once you’re
done, select and group (Control-G)
all of the bumper’s composing shapes before moving on to the next step.

adding the two rectangles to the trains left bumper

Step 17

Add the bottom rectangular insertion using a 6 x 4 px rectangle (#3F3330), which we will bottom align to the
train’s larger body. Once you’re done, select and group (Control-G) all of the details that we’ve added so far, since we
will use them to fill up the larger body’s right side.

adding the bottom rectangular insertion to the trains main body

Step 18

Create a copy (Control-C > Control-F) of the details that we’ve just finished working on, which we will vertically reflect (right click > Transform > Reflect
> Vertical
) and then position onto the train’s opposite side. Once
you’re done, select and group (Control-G)
all of the train’s composing sections before moving on to the next step.

adding the details to the trains right side

Step 19

Start working on the train’s bottom section by creating a 64 x 6 px rectangle (#55AA9A) with a 4 px thick outline (#3F3330), which we
will group (Control-G) and then
position below the train’s larger body.

creating and positioning the main shapes for the trains bottom section

Step 20

Next, create an 8 x 6 px rectangle
(#3F3330), which we will center align to the two shapes that we’ve just
grouped.

adding the center rectangle to the trains bottom section

Step 21

Add the side pieces using two 4 x
6 px
rectangles (#3F3330), which we will position onto the outer edges of
the wider section.

adding the side pieces to the trains bottom section

Step 22

Finish off the train’s bottom section by adding a 60 x 6 px rectangle (#3F3330) followed by a slightly smaller 24 x 4 px one (#3F3330), to the center
of its bottom edge. Once you’re done, select and group (Control-G) all of the current section’s composing shapes together,
doing the same for the entire train afterwards.

adding the horizontal detail rectangles to the trains bottom section

Step 23

Finish off the train, and with it the icon
itself, by drawing the small railroad section from underneath using a 4 px thick Stroke (#3F3330). Take your time and, once you’re done,
select and group (Control-G) all of
its composing sections together.

finishing off the train icon

6. How to Create the Bus Icon

Assuming you’ve finished working on the
first icon, lock its layer and then move on up to the next one (that would be
the third one) where we’ll start working on the iconic New York bus.

Step 1

As we did with the
previous icon, start by creating the circular background using a 120 x 120 px circle, which we will
color using #FF8D60 and then center align to the second active drawing area.

creating and positioning the main shape for the bus icons background

Step 2

Create the vehicle’s roof section using a 70 x 12 px rounded rectangle (#55AA9A)
with a 6 px Corner Radius and a 4 px thick outline (#3F3330), which we
will group (Control-G) and then
center align to the larger circle, positioning them at a distance of 20 px from its top edge.

creating and positioning the main shapes for the buss roof

Step 3

Add the center detail piece using a 42 x 4 px rounded rectangle (#3F3330)
with a 2 px Corner Radius, which we
will center align to the shapes that we’ve just grouped.

adding the center detail piece to the buss roof

Step 4

Create the circular front lights using two 4 x 4 px circles (#3F3330), which we will
position onto the sides of the larger center piece, at a distance of just 4 px from it.

adding the circular lights to the buss roof

Step 5

Add the bottom insertion using a 12
x 3 px
rectangle (#3F3330), which we will center align to its bottom edge.

adding the bottom center insertion to the buss roof

Step 6

Create the smaller insertions using two 4 x 3 px rectangles (#3F3330), which we
will position at a distance of 2 px from
the larger insertion’s side edges.

adding the smaller bottom insertions to the buss roof

Step 7

Finish off the roof by creating a 50 x 6 px rectangle (#3F3330), which we
will adjust by individually selecting and pushing its top anchor points to the
inside by a distance of 4 px (right click > Transform > Move >
Horizontal > + / – 4 px
depending on which side you start with). Once
you’re done, position the resulting shape on top of the larger shapes,
selecting and grouping (Control-G)
all of them together afterwards.

adding the top section to the buss roof

Step 8

Create the bus’s main body using a 66 x 44 px rectangle (#CBF7EC) with a 4 px thick outline (#3F3330), which we
will group (Control-G) and then
position below the roof that we’ve just finished working on.

creating and positioning the main shapes for the buss body

Step 9

Create the windows using two 28 x 20 px rounded rectangles (#3F3330)
with a 4 px Corner Radius, which we
will horizontally distance at 2 px from
one another, which we will group (Control-G)
and then center align at a distance of 2
px
from the larger body’s top edge.

adding the two windows to the buss main body

Step 10

Add the horizontal divider line using a 74 x 2 px rectangle (#3F3330), which we
will position at a distance of just 2 px
from the bus’s windows, making sure to center align it to
them before moving on to the next step.

adding the horizontal detail line to the buss main body

Step 11

Create the smaller detail segments using fourteen 2 x 1 px rectangles (#3F3330), which we will place at a horizontal distance of 2 px from
one another, grouping (Control-G)
and then positioning them below the shape from the previous step.

adding the smaller horizontal detail lines to the buss main body

Step 12

Add the smaller rectangular light using a 2 x 4 px rectangle (#3F3330), which we will position at a distance
of 2 px from the larger body’s
bottom-left corner.

adding the smaller rectangle light to the left side of the buss body

Step 13

Create the larger light using a 12
x 4 px
rectangle (#3F3330), which we will position at a distance of 2 px from the smaller one’s right edge.

adding the larger rectangular light to the left side of the buss body

Step 14

Add the circular light using a 2
x 2 px
circle (#3F3330), which we will position above the gap created by
the two rectangular lights, at a distance of just 2 px.

adding the circular light to the left side of the buss body

Step 15

Star working on the left windshield wiper by creating the base using a 6 x 2 px rectangle (#3F3330), which we
will position above the larger rectangular light, at a distance of just 2 px from its top and right edges.

adding the windshield wipers base to the left side of the buss main body

Step 16

Create the wiper’s end section using a 2 x 12 px rectangle (#3F3330), which we will position onto the
right side of the bus, at a distance of 8
px
from its base.

adding the windshield wipers end piece to the left side of the buss main body

Step 17

Finish off the wiper by drawing the diagonal body using a 2 px thick Stroke (#3F3330) starting from the center of the base all the way
up to the top of the end piece. Once you’re done, select and group all of the
current section’s composing shapes together using the Control-G keyboard shortcut.

drawing the windshield wipers body to the left side of the buss main body

Step 18

Select and group (Control-G)
all the left-sided details, and then use a copy (Control-C > Control-F) of them to add the right-sided ones, making sure to vertically reflect them once you have them in place (right click > Transform > Reflect
> Vertical
).

adding the right sided details to the buss main body

Step 19

Add the side lights using two 4 x 4 px squares (#3F3330), which we
will position onto the outside of the bus’s larger body, so that they’re in line with the inner rectangular lights.

adding the side lights to the buss main body

Step 20

Start working on the left side mirror by
creating its main body using a 6 x 12 px
rectangle (#3F3330), which we will position at a distance of 2 px from the vehicle’s main body and 4 px from its roof.

creating and positioning the main shape for the buss left side mirror

Step 21

Finish off the mirror by adding an 8 x 2 px rectangle (#3F3330) on top of
it, followed by a smaller 4 x 2 px one
(#3F3330) towards its bottom. Once you’re done, select and group all three
shapes together using the Control-G
keyboard shortcut.

adding the support arms to the buss left side mirror

Step 22

Create the right mirror’s main body using a 6 x 8 px rectangle (#3F3330), which we
will position at a distance of 2 px from
the larger body and 10 px from its
roof.

creating and positioning the main shape for the buss right side mirror

Step 23

Add the support arms by positioning an 8 x 2 px rectangle (#3F3330) underneath
the mirror’s main body, followed by a smaller 4 x 2 px one (#3F3330) towards its top. Once you’re done, select
and group (Control-G) all of the
mirror’s composing shapes together, doing the same for the larger body
afterwards.

adding the support arms to the buss right side mirror

Step 24

Create the main shapes for the vehicle’s front
bumper using a 70 x 8 px rectangle
(#55AA9A) with a 4 px thick outline
(#3F3330), which we will group (Control-G)
and then position below its larger body so that their outlines end up
overlapping.

creating and positioning the main shapes for the buss front bumper

Step 25

Start adding details to the bumper by creating a
26 x 2 px rectangle (#3F3330), which
we will center align to its larger composing shapes.

adding the center detail rectangle to the buss front bumper

Step 26

Add the vertical delimiters using two 4 x 8 px rectangles (#3F3330), which we
will position at a distance of 4 px from
the center piece’s side edges.

adding the vertical delimiters to the buss front bumper

Step 27

Create the side insertions using two 8 x 2 px rectangles (#3F3330), which we will position in the center
of the space created by the bumper and the vertical delimiters.

adding the side insertions to the buss front bumper

Step 28

Add the bumper’s side sections using two 4 x 8 px rectangles (#3F3330), which we will position on the
outside of its main body.

adding the side sections to the buss front bumper

Step 29

Create another larger 66 x 6 px rectangle,
which we will color using #3F3330 and then position below the bumper’s main
body.

adding the larger rectangle to the bottom of the buss front bumper

Step 30

Add the wheels using two 12 x 8
px
rounded rectangles (#3F3330) with a 2
px Corner Radius
, which we will position as seen in the reference image, at
a distance of 4 px from its sides.

adding the wheels to the buss front bumper

Step 31

Finish off the current section by adding an 18 x 2 px rectangle, which we will color using #3F3330 and then
position below the bumper’s bottom detail rectangle. Once you’re done, select
and group (Control-G) all of the
current section’s composing shapes together, doing the same for the entire bus
afterwards.

adding the bottom detail rectangle to the buss front bumper

Step 32

Finish off the icon by adding the little road strip, using an 8 x 12 px rectangle (#3F3330), which we
will adjust by individually selecting and pushing its top anchor points to the
inside by a distance of 2 px (right click > Transform > Move >
Horizontal > + / – 2 px
depending on which side you start with). Once
you’re done, position the resulting shape at a distance of 2 px from the bus’s bottom, selecting and grouping (Control-G) all its composing sections
together before moving on to the next icon.

finishing off the bus icon

7. How to Create the Tram Icon

We are now down to
our third and last icon, so without wasting any more time, make sure you’re on
the right layer (that would be the fourth one) and let’s finish this.

Step 1

Kick things off by creating the circular background using a 120 x 120 px circle, which we will
color using #FF8D60 and then center align to the third active drawing area.

creating and positioning the main shape for the tram icons background

Step 2

Start working on the vehicle’s pantograph by creating an 18 x 6 px rectangle (#55AA9A) with a 4 px thick outline (#3F3330), which we
will group (Control-G) and then
center align to the circular background, positioning them at a distance of 20 px from its top edge.

creating and positioning the main shapes for the trams roof

Step 3

Add the little rectangular insertion using a 6 x 3 px rectangle (#3F3330), which we will center align to the two
shapes’ bottom edge.

adding the rectangular insertion to the bottom of the trams roof

Step 4

Create another slightly larger 14
x 4 px
rectangle, which we will color using #3F3330 and then position on
top of the roof section, making sure to center align it to the larger shapes.

adding the rectangular detail shape to the trams roof

Step 5

Take a couple of moments and draw the pantograph’s rail using a 2 px thick Stroke line (#3F3330), using the reference image as your main guide.
Once you’re done, select and group (Control-G)
all of the current section’s composing shapes together before moving on to the
next step.

adding the rail to the trams pantograph

Step 6

Create the tram’s roof using a 50 x 6 px rectangle (#CBF7EC) with a 4 px thick outline (#3F3330), and a 30 x 3 px rectangle (#3F3330) aligned
to their top edge, grouping and positioning all three shapes right underneath
the pantograph.

creating and positioning the main shapes for the trams upper body

Step 7

Add the body’s upper section using a 42 x 26 px rectangle (#55AA9A) with a 4 px thick outline (#3F3330), which we will group (Control-G) and then position below its roof.

creating and positioning the main shapes for the trams window section

Step 8

Add the front windows using three 10
x 18 px
rectangles (#3F3330) with a 4
px
top Corner Radius and a 2 px bottom one, which we will horizontally stack 2 px from one another, grouping (Control-G) and then positioning them in the center of the larger rectangles. Once you’re done, select and group (Control-G) all of the current section’s
shapes as well before moving on to the next step.

adding the three windows to the trams window section

Step 9

Create the tram’s bottom section using a 42 x 20 px rectangle (#CBF7EC) with a 4 px thick outline (#3F3330), which we will group (Control-G)
and then position below the previously grouped shapes.

creating and positioning the main shapes for the trams bottom section

Step 10

Add the smaller center section using a 12 x 20 px rectangle with a 4 px thick Stroke (#3F3330), which we will center align to the
shapes from the previous step.

adding the smaller center section to the trams bottom section

Step 11

Add the center lights using two 4 x 4 px circles (#3F3330), vertically
stacked 2 px from one another,
which we will group (Control-G) and
then position at a distance of 2 px from
the center section’s top edge.

adding the center circular lights to the trams bottom section

Step 12

Create the bottom rectangular insertion using a 4 x 4 px square (#3F3330), which we
will center align to the center section’s bottom edge.

adding the bottom rectangular insertion to the trams bottom section

Step 13

Add the side insertions using two 4 x 4 px squares (#3F3330), which we
will position on the outer edges of the center section, at a distance of just
2 px from its bottom edge.

adding the rectangular side insertions to the trams bottom section

Step 14

Create the left and right horizontal detail
lines using two sets of two 15 x 2 px rectangles
(#3F3330) vertically stacked 2 px from
one another, which we will group (Control-G)
and then position onto the sides, at a distance of just 2 px of the larger section’s top edge.

adding the horizontal detail lines to the trams bottom section

Step 15

Finish off the current section by adding the
smaller circular lights using two 2 x 2
px
circles (#3F3330), which we will individually position at a distance of 2 px from the larger outline’s bottom
corners. Once you’re done, select and group (Control-G) all its composing shapes before moving on to the next
step.

adding the smaller circular lights to the trams bottom section

Step 16

Start working on the bumper by creating a 50 x 8 px rectangle (#55AA9A) with a 4 px thick outline (#3F3330), which we
will group (Control-G) and then
position below the previous section.

creating and positioning the main shapes for the trams front bumper

Step 17

Add the center detail using an 18 x 2 px rectangle, which we will
color using #3F3330 and then center align to the shapes that we’ve just
grouped.

adding the center detail rectangle to the trams front bumper

Step 18

Create the bumper’s bottom insertions using two 6 x 4 px rectangles (#3F3330), which we
will position at a distance of 2 px from
its outer edges.

adding the bottom rectangular insertions to the trams front bumper

Step 19

Add the bumper’s side pieces using two 4 x 8 px rectangles (#3F3330), which we
will position onto the outer edges of the larger rectangles, as seen in the
reference image.

adding the side pieces to the trams front bumper

Step 20

Move a few pixels towards the bottom and create
a 46 x 4 px rectangle (#3F3330),
which we will position below the bumper itself.

adding the bottom detail rectangle to the trams front bumper

Step 21

Create another smaller 54 x 2 px rectangle, which we will color using #3F3330 and then
position below the one from the previous step.

adding the smaller bottom detail rectangle to the trams front bumper

Step 22

Finish off the current section by creating a 38 x 4 px rectangle (#3F3330) with a 2 px bottom corner Radius, which we will position below the tram’s bottom section.
Once you’re done, select and group (Control-G)
all its composing shapes before moving on to the next step.

adding the bottom detail to the trams front bumper

Step 23

Create the left handrail using a 2 x 46 px rectangle (#3F3330), which we
will position onto the side of the tram, between its roof and front bumper.

creating and positioning the main shape for the trams left handrail

Step 24

Add the handrail’s support arms using two 4 x 2 px rectangles (#3F3330), which we
will position onto its right side, at a distance of 6 px from its top and bottom edges. Once you’re done, select and
group all three shapes together using the Control-G
keyboard shortcut.

adding the support arms to the trams left handrail

Step 25

Create the right handrail using a copy (Control-C > Control-F) of the one
that we’ve just finished working on, which we will vertically reflect (right click > Transform > Reflect
> Vertical
) and then position on the opposite side of the tram’s body.
Once you’re done, select and group (Control-G)
all of the tram’s composing sections before moving on to the next step.

adding the trams right handrail

Step 26

Finish off the tram, and with it the icon itself,
by taking a couple of moments and drawing the three rail segments using a 4 px thick Stroke with the color set to #3F3330. Once you’re done, select and
group (Control-G) all of the icon’s
composing sections before saving the finished project.

finishing off the tram icon

It’s a Wrap!

There you have it, fellow icon lovers—a nice little pack created using
the most basic geometric shapes and tools that one can find within Illustrator.
As always, I hope you’ve enjoyed the tutorial and managed to learn something new
and useful along the way.

finished project preview